About
Product
Solution
Support
News
Join Us
PowerPard
AC Drives
EV/HEV Controllers
GK610
GK150
GK100
GS100M
GK500
GK620
GK820
GK1000
GK510
SLR01A
GK620E
ES101
GK820
Overview
Specs
Options
Cases
Classic cases
GK800 for corrugated paper production line
GK800 for corrugated paper production line
Model
:GK800
Power
:15kW
Time
:2015
Locale
:FOSHAN
Description
:Updating
GK800 for pipemaking machine
GK800 for pipemaking machine
Model
:GK800
Power
:14kW
Time
:2016
Locale
:GUANGZHOU
Description
:
In this case, the pipe making machine is used for aluminum welding of car radiator. The production process is as follows: Mold forming -> High frequency welding -> Automatic grinding and polishing -> Automatic cut.
1
System Components: GK800-4T15B + CM2 option+ PG2 option
2
GK800 supports synchronous motor (PMSM) whose superior output torque at low frequency can meet low-speed feeding requirement.
3
Due to dynamic response, it can greatly improve production efficiency and reduce cost.
4
GK800 can be fully compatible with Siemens host system, which supports PROFIBUS-DP communication.
GK800 for CNC
GK800 for CNC
Model
:GK800
Power
:3.7/5.5kW
Time
:2015
Locale
:ZHONGSHAN
Description
:
In this case, the system consists of GK800, PG2 option and AC asynchronous servo spindle motor, which is used for replacing old system: AC drive and Ordinary asynchronous motor. The actual effect shows that new system is much more better.
1
High output torque at low frequency can meet requirements of low-speed cutting process.
2
High precision positioning fits the bill of rigid tapping.
3
It is able to accelerate from 0 to 6000 r/min within 2 seconds, which also has good dynamic response, overcurrent & overvoltage capability.
4
Quasi-stop error is very small, the position
deviation
is ±1 pulse.
GK800(Z) for electro-hydraulic servo
GK800(Z) for electro-hydraulic servo
Model
:GK800(Z)
Power
:32kW
Time
:2016
Locale
:FOSHAN
Description
:
GK800(Z) series are dedicated for electro-hydraulic servo, which are widely applied to die casting machine, hydraulic press machine, injection molding machine, etc.
1
System Components : GK800Z-4T37B + PG6 option
2
The system adjusts the output power in real time according to the flow and pressure.
3
The closed-loop control makes the system be more precise.
4
Short acceleration / deceleration time ( about 50 ms) , and the efficiency has been multiplied several times.
5
Low noise,
8-10 dB
lower than the average level.
6
Low oil temperature, no overflow at
high pressure
, and saving maintenance cost.
GK800 for steel bending hoop machine
GK800 for steel bending hoop machine
Model
:GK800
Power
:22/11kW
Time
:2016
Locale
:DONGGUAN
Description
:
In the case, the system is consist of GK800, PG6 option and synchronous motor, which is used for replacing old system: AC drive and Ordinary asynchronous motor.
1
Master and slave synchronization control (GK800-4T22B/ GK800-4T11B): Pulse following control, which improved the response speed and control accuracy.
2
Output big torque when low-speed, the steel will not slip.
3
Compared with the old solution, the new one improved production efficiency & product quality, meanwhile reduced energy consumption.
GK800 for polishing machine
GK800 for polishing machine
Model
:GK800
Power
:3kW
Time
:2014
Locale
:JIANGMEN
Description
:
In this case , GK800 with permanent magnet synchronous servo motors drive multiple polished grinding heads through CANopen protocol.
1
System Components: GK800-4T3.7B + CM3 option (CANopen) + Synchronous servo
2
The anti-interference ability of CANopen is strong, meanwile the response speed of the system is also improved.
3
All servo adopts fully automated control, the whole system is high precision, high efficiency, energy saving, ecofriendly.
4
Greatly reduce the noise, improve the staff's working environment.
GK800 for CNC
GK800 for CNC
Model
:GK800
Power
:5.5kW
Time
:2016
Locale
:HANGZHOU
Description
:
GK800 is applied in CNC spindle, which is performing VC control to positioning and rigid tapping.
1
AC Drive mode: GK800-4T5.5B-1A
2
Motor: Asynchronous motor , Max. speed is up to 24000 r/min.
GK800(M) for CNC
GK800(M) for CNC
Model
:GK800(M)
Power
:15kW
Time
:2016
Locale
:BAOJI
Description
:
GK800(M) is applied in CNC spindle. the ACC. time is 2.8s, and DEC. time is 1.8s.
1
AC Drive mode: GK800M-4T15B
2
Motor: Asynchronous servo motor , whose speed is 0 to 4500 r/min.
More...
0
About Us
Overview
Our values
Milestones
Contact Us
News & Media
News
Join us
Join us
Contact
Contact